Steering Gear With Steering Damper

Steering Gear With Steering Damper
1. Tie rod end
^ Make sure dust caps are seated correctly and not damaged
2. Nut
^ 40 Nm (30 ft. lbs.)
3. Clamp
4. Boot
^ Check for damage
^ Can be replaced with steering gear installed
^ Must not be twisted after adjusting rack
5. Clamp
^ Always replace
^ Tighten using VAG1275
6. O-ring
^ Always replace
7. Inner tie rod end
^ 100 Nm (74 ft. lbs.)
^ Grease joint using steering gear grease AOF 063 000 04
8. Steering damper bracket
9. O-ring
^ Always replace
10. Spring washer
11. Hose clamp
^ Always replace
^ Tighten using VAG1275
12. Boot
^ Check for damage
^ Can be replaced with steering gear installed
13. Power steering gear
^ Grease rack using steering gear grease AOF 063 000 04
14. Nut
^ 10 Nm (7 ft. lbs.)
^ To loosen and tighten counter hold on steering damper piston rod hex
15. Bushing
16. Rubber mount
^ Two part
17. Steering damper
18. Bolt
^ 35 Nm (26 ft. lbs.)
19. Screw plug
^ 13 Nm (10 ft. lbs.)
^ For centering steering