With Manufacturer's Scan Tool

Erase DTC Memory (Scan Tool Function 05)

Automatic vertical headlight aim control system


NOTE: If DTC memory cannot be erased, check DTC memory again and repair any malfunctions.


Test requirements
- DTC memory checked.
- All malfunctions repaired

After checking DTC memory:

Indicated on display


Rapid data transfer HELP
Select function XX


Press buttons -0- and -5- to select "Erase DTC Memory" function 05.

Indicated on display


Rapid data transfer Q
05 - Erase DTC Memory


- Press -Q- button to confirm input.

Indicated on display


Rapid data transfer ->
DTC Memory is erased


DTC memory is erased.

- Press -> button.

Indicated on display


Rapid data transfer HELP
Select function XX


NOTE:
If this display appears as shown, the test sequence was incorrect. Follow the sequence of operations precisely, first read DTC memory, repair any malfunctions (if necessary) then erase DTC memory.


Attention!
DTC Memory is not interrogated