Engine Operating Conditions (Engine Electronics) Checking

NOTE: This test checks whether the Motronic Engine Control Module (ECM) -J220- recognizes the engine operating conditions.

Required special tools and test equipment
VAG 1551 or VAG 1552 scan tool with VAG 1551/3 adapter

Test requirements
- Engine oil temperature at least 80 °C (176 °F)

Checking
- Connect VAG 1551 or VAG 1552 scan tool and press buttons -0- and -1- to insert "Engine Electronics" address word 01 (with engine running at idle).

Indicated on display

Rapid data transfer HELP
Select function XX

- Press buttons -0- and -8- to select "Read Measuring Value Block" function 08, and press -Q- button to confirm input.

Indicated on display

Read Measuring Value Block HELP
Input display group number XXX

- Press buttons -0-, -0- and -5- to input display group number 5 (005), and press -Q- button to confirm input.

Indicated on display (1-4 display fields)

Read Measuring Value Block 5 ->
1 2 3 4

- Check engine operating conditions (display field 4):





If displayed values are NOT OK (not as specified):
- Check free movement of accelerator pedal and cable.
- Check throttle valve control module.