Diagnostic Mode 01: Obtain Data

Diagnostic Mode 01: Obtain data

Diagnostic Mode 01 is used to display and monitor all emissions related measured values.

Test requirement
- Coolant temperature at least 80�C.

Procedure

- Connect the scan tool.

- Start the engine and run at idle.

- Select "Diagnostic Mode 1: Obtain data.".

- From the following table, select the desired "PID" that is to be monitored, e.g. "PID 05-Coolant temperature".

Note: More than one "PID" may be selected and monitored.

The current values of the component or system that is being monitored will be displayed on the scan tool screen.






- Switch the ignition off.

End of procedure.