Intake Manifold Tuning (IMT) Function, Checking
Intake Manifold Tuning (IMT) function, checking
NOTE: The following test should only be conducted if performance deficiencies occur.
- Increase engine rpm clearly above 4500 RPM.
Intake manifold tuning vacuum solenoid must be actuated (solenoid is located on intake manifold, left-front, under the ignition coils).
If the vacuum solenoid is not actuated:
- Check intake manifold tuning valve -N156- (change-over valve). Intake Manifold Tuning (IMT) Valve, Checking
- Check vacuum system for leaks. Refer to Vacuum System, Checking For Leaks Testing and Inspection
- Check that vacuum lines are correctly installed, do not leak and are not blocked.
- Check tuning (change-over) mechanism for ease of movement (activate change-over linkage by hand).