Procedures

NOTES:
- Control modules are supplied uncoded.
- An uncoded control module will cause the airbag Malfunction Indicator Lamp (MIL) to light up continuously
- The coding procedure is carried out using VAG1551 Scan Tool (ST).

If no coding appears on VAG1551 Scan Tool (ST), or if a new control module has been installed, carry out the coding procedure as follows:

Carrying out "Code Control Module" function 07




Indicated on display

- Press buttons -0- and -7- to select "Code Control Module" function 07.




Indicated on display

- Press -Q- button to confirm input.




Indicated on display

- Enter coding for airbag control module using keyboard.

Coding 00106

00106: vehicles with front airbags, side airbags for driver and front passenger, front seat belt tensioners and 3 rear seat belt tensioners




Indicated on display

- Press -Q- button to confirm input.




Indicated on display (the control module identification will appear on the display together with the coding that has been entered, e.g. 00106)

- Press -> button.




Indicated on display

- Press buttons -0- and -6- to select "End Output" function 06.




Indicated on display

- Press -Q- button to confirm input.




Indicated on display