Child Restraint: Testing and Inspection

Seat Belt Restraint Function For Holding Additional Child Seats (Not For Driver's Seat Belt), Checking

The complete belt assembly (including B-pillar trim) must be installed when checking this function.
- Activation of restraint function:
- Pull out belt webbing as far as it will go.

- Function:
The belt should retract with an audible noise.
If the belt retraction is then stopped, it should not be possible to pull the belt out again until the function is deactivated.

- Deactivation:
Allow the belt to retract as far as the last 100 mm (approx.).
This should deactivate the restraint function at the latest when the belt reaches the last 100 mm. The belt will then function again in the normal way.