Left (1/3) Section of Backrest

Left (1/3) Section Of Backrest, Removing And Installing







Removing
- Fold both backrest sections forward.
- Unclip trim -3- from rear in direction of arrow; if necessary, pry out from rear through hole.
- Remove bolt -1- and take off clamp -2-.
- Bolt -1- tightening torque: 10 Nm (7 ft lb)
- Lift backrest -1- out of center support bracket -2-, arrow -A- and pull off fitting -3-, arrow -B-.
- Unplug connectors for heated backrest.







Installing


NOTE: Re-install grommet -4- if it is pulled out of outer fitting when removing backrest.


Install in reverse order of removal.