Console, Removing and Installing

Console, Removing And Installing

NOTE: Illustration shows a right seat.







1 - Console

Removing
- Remove seat.
- Place seat so that underside of seat cushion is easily accessible
- Disconnect cable ties that are attached to console.
- Remove coupling holder for harness connector (two bolts).
- Unbolt the two relays.
- Unbolt bolts - 3 - (4x) on console - 1 -.
- Remove console - 1 - from seat - 2 -.







Installing

NOTE: Replace bolts - 3 -.

- Place the new console - 1 - on the seat - 2 -
- Tighten bolts - 3 - (4x).

- Tightening torque: 23 Nm (17 ft lb)

2 - Seat
3 - Bolts (4x)
- Tightening torque: 23 Nm (17 ft lb)