ABS Rear Axle Components, Removing and Installing

ABS rear axle components, removing and installing





1. ABS wheel speed sensor
- Must be replaced when installing new wheel bearing/hub unit
- Removing and installing, Refer to Sensors and Switches - Bakes and Traction Control.
- Installation position
- Always replace seal and lubricate with brake cylinder paste G 000 650
2. Clip
3. Axle beam
4. Backing plate
5. ABS wheel speed sensor rotor
- Checking, Refer to Sensors and Switches - Bakes and Traction Control.
- Removing and installing, Refer to Sensors and Switches - Bakes and Traction Control.
- If damaged or faulty, replace together with wheel bearing/hub unit
6. Wheel bearing/hub unit
- Servicing
Refer to Sensors and Switches - Bakes and Traction Control.
- When replacing wheel bearing/hub unit, ABS wheel speed sensor must also be replaced
7. Socket- head bolt, 60 Nm
8. Brake disc