Oil Pump: Service and Repair

- Remove oil pan.
- Remove toothed belt.





- Remove toothed belt tensioning roller -1-.
Tightening torque: 20 Nm (15 ft. lbs.).
- Remove idler wheel -3-.
Tightening torque: 45 Nm (33 ft. lbs.).
- Remove valve for oil spray jet -2-.
Tightening torque: 40 Nm (30 ft. lbs.).
- Remove toothed belt tensioner -4-.
Tightening torque: 10 Nm (7 ft. lbs.).
- Remove lever for toothed belt tensioner -5-.
- Remove oil pump.
Tightening torque: 10 Nm (7 ft. lbs.).

Note: When installing the oil pump, make sure that the drive dog on the crankshaft engages in the oil pump.





Tightening torques








Other tightening torques