Three Way Catalytic Converter (TWC), Checking

Three Way Catalytic Converter (TWC), checking

Function test

- Perform the function test in Diagnostic Mode 06. Diagnostic Mode 06: Checking Test Results of Components That Are Not Continuously Monitored

If the specified values are exceeded:

- Replace the catalytic converter with front exhaust pipe. Service and Repair

Final procedures

After repair work, the following work steps must be performed in the following sequence:

1. Check the DTC memory.
2. If necessary, erase the DTC memory.
3. If the DTC memory was erased, generate readiness code.

End of diagnosis.