Headlight Washer System, Removing and Installing

Removing
- Disconnect washer fluid line for headlight washer system at connection -X-.
- Disconnect spray jet from washer fluid hose.
- Pull spray jet cover upward from bumper and disengage retainers using small screwdriver.
- Remove phillips head screws -2- (two on each spray jet) to remove jets -1-.
- Loosen phillips head screw -4- on spray jet bracket -3-.

Installing
- Install spray jets -1- into bumper with screws -2-.
- Install phillips head screw -4- into spray jet bracket -3-.
- Install spray jet covers and press in until they snap into place audibly.
- Connect washer fluid hose to spray jets.
- Connect washer fluid line for headlight washer system at connection -X-.
- Install bumper.