Programming and Relearning
Code Control Module
Using this function, the control module for automatic vertical aim control can be coded as follows:
- Vehicle model
- Drive layout
NOTE: Varying combination possibilities are adjusted via coding.
Initiating coding
Indicated on display
Rapid data transfer HELP
Select function XX
- Press buttons -0- and -7- to select "Code Control Module" function 07.
- Press -Q- button to confirm input.
Indicated on display:
Code Control Module
Input code number XXXXX (0-32000)
- Input code number using coding table. Example: 00001
Indicated on display:
Code Control Module Q
Input code number 00001 (0-32000)
- Press -Q- button to confirm input.
Indicated on display after approx. 5 seconds:
4B0907357A automatic LWR A8 D02 ->
Coding 00001 WSC 06812
- End coding with the -> button.
Indicated on display
Rapid data transfer HELP
Select function XX
- Press buttons -0- and -6-. This selects "End Output", function 06.
Indicated on display:
Rapid data transfer Q
06 - End Output
- Press -Q- button to confirm input.
Coding table