Nuts and Bolts

NUTS AND BOLTS

- Tighten nuts and bolts for attaching covers and housings or the valve body in stages in accordance with the specified tightening order and method.

- Loosen the bolts in the opposite order of tightening.

- Tighten and loosen nuts and bolts for attaching covers and housings diagonally in stages if no specific tightening order is stated.

- The tightening torques stated apply to nuts and bolts which have not been oiled.

- Clean the threads of bolts to be installed with locking fluid with a wire brush. Then install bolts with AMV 185100 A1.

- Replace self-locking nuts.