Programming and Relearning

The navigation system uses the speed signal from speedometer (GALA) for calculating mileage.

Using the adaptation function, the following changes can be made and saved.
- Changing tire size
- Changing pulse number per wheel rotation (GALA)
- Locking i.e switching free production diagnostic
- Connection of own i.e. external speakers
- Changing country selection

Individual functions are called up by entering the appropriate adaptation channel numbers (listed in the adaptation table).

Adaptation table

01 - Tire circumference in mm
02 - Pulse number per wheel rotation (GALA)
03 - Production diagnostic (function status register) locking i.e switching free
04 - Connection of own/external speakers
05 - Country selection

Initiating "Adaptation" function 10

Indicated on display


Rapid data transfer HELP
Select function XX


- Press buttons -1- and -0- to select "Adaptation" function 10.

Indicated on display:


Rapid data transfer Q
10 Adaptation


- Press Q button to confirm input

Indicated on display:


Adaptation
Enter channel number XX


- Enter desired adaptation channel (adaptation table).
- Press Q button to confirm input


NOTE: After changing an adaptation value or ending an adaptation channel, "Adaptation" function 10 must be performed again before selecting another adaptation channel.


Adapt tire circumference

Indicated on display


Adaptation
Enter channel number XX


- Press buttons 0 and 1 to select Channel 1.


NOTE: An erroneous entry can be corrected by pressing button -C-.


- Press Q button to confirm input

Indicated on display


Channel 1 Adaptation 2060 ->
<-1 3->


The selected channel and the currently stored tire circumference in mm will be displayed in the line listed above.

- Press -> button.

Indicated on display


Channel 1 Adaptation 2060 ->
Input Adaptation value XXXXX


- Enter new tire circumference, adding one zero to the four-digit number (e.g. 1910 becomes 01910). See Tire table.
- Press Q button to confirm input

Indicated on display


Channel 1 Adaptation 2075 Q
<-1 3->


- Press Q button to confirm input

Indicated on display


Channel 1 Adaptation 2075 Q
Store changed value?


- Press Q button to confirm input

Indicated on display


Channel 1 Adaptation 2075 ->
Changed value is stored


- Press -> button.

Indicated on display


Rapid data transfer HELP
Select function XX


- Press buttons 0 and 6 to select "End output" function 06.
- Press -> button.

Adapt pulse number/wheel rotation (GALA)

Indicated on display


Adaptation
Enter channel number XX


- Press buttons 0 and 2 to select Channel 2.


NOTE: An erroneous entry can be corrected by pressing button -C-.


- Press Q button to confirm input

Indicated on display


Channel 2 Adaptation 4 ->
<-1 3->


The selected channel and the currently stored impulse number of the ABS wheel speed sensors will be displayed

- Press -> button.

Indicated on display


Channel 2 Adaptation 4 ->
Input Adaptation value XXXXX


- Enter new impulse number, adding four zeros to the two-digit number (e.g. 8 becomes 00008). See Tire table.
- Press Q button to confirm input.

Indicated on display


Channel 2 Adaptation 8 Q
<-1 3->


- Press Q button to confirm input

Indicated on display


Channel 2 Adaptation 8 Q
Store changed value?


- Press Q button to confirm input

Indicated on display


Channel 2 Adaptation 8 ->
Changed value is stored


- Press -> button.

Indicated on display


Rapid data transfer HELP
Select function XX


- Press buttons 0 and 6 to select "End output" function 06.
- Press -> button.

Tire circumference table for Audi A8







Adapting production diagnostic (function status register)

Indicated on display


Adaptation
Enter channel number XX


- Press buttons 0 and 3 to select Channel 3.


NOTE: An erroneous entry can be corrected by pressing button -C-.


- Press Q button to confirm input

Indicated on display


Channel 3 Adaptation 0 ->
<-1 3->


The selected channel and the condition of the production diagnostic (function status register) is displayed in the upper line (0 = locked, 1 = active).

- Press -> button.

Indicated on display


Channel 3 Adaptation 0 ->
Input Adaptation value XXXXX


- Enter new adaptation value (e.g. 00001).
- 00000 = Production diagnostic locked
- 00001 = Production diagnostic active


- Press Q button to confirm input

Indicated on display


Channel 3 Adaptation 1 Q
<-1 3->


- Press Q button to confirm input

Indicated on display


Channel 3 Adaptation 1 Q
Store changed value?


- Press Q button to confirm input

Indicated on display


Channel 3 Adaptation 1 ->
Changed value is stored


- Press -> button.

Indicated on display


Rapid data transfer HELP
Select function XX


- Press buttons 0 and 6 to select "End output" function 06.
- Press -> button.

Adapt speaker connection

Indicated on display


Adaptation
Enter channel number XX


- Press buttons 0 and 4 to select Channel 4.


NOTE: An erroneous entry can be corrected by pressing button -C-.


- Press Q button to confirm input

Indicated on display


Channel 4 adaptation 0 ->
<-1 3->


The selected channel and the condition and the type of speaker connection is displayed in the upper line (0 = external radio, 1 = own speaker). If a radio system is installed, front left speakers are used, otherwise a separate speaker (hands-free speaker) is installed.

- Press -> button.

Indicated on display


Channel 4 Adaptation 0 ->
Input Adaptation value XXXXX


- Enter new adaptation value (e.g. 00001).
- 00000 = external radio
- 00001 = separate speaker

- Press Q button to confirm input

Indicated on display


Channel 4 Adaptation 1 Q
<-1 3->


- Press Q button to confirm input

Indicated on display


Channel 4 Adaptation 1 Q
Store adaptation value?


- Press Q button to confirm input

Indicated on display


Channel 4 Adaptation 1 ->
Adaptation value is stored


- Press -> button.

Indicated on display


Rapid data transfer HELP
Select function XX


- Press buttons 0 and 6 to select "End output" function 06.
- Press -> button.

Adapt country selection

Indicated on display


Adaptation
Enter channel number XX


Press buttons 0 and 5 to select Channel 5.


NOTE: An erroneous entry can be corrected by pressing button -C-.


- Press Q button to confirm input

Indicated on display


Channel 5 Adaptation 0 ->
<-1 3->


The selected channel and the country selection is displayed in the upper line (0 = Europe, 1 = USA / Canada).

- Press -> button.

Indicated on display


Channel 5 Adaptation 0 ->
Input Adaptation value XXXXX


- Enter new adaptation value (e.g. 00001).
- 00000 = Europe
- 00001 = USA

- Press Q button to confirm input

Indicated on display


Channel 5 Adaptation 1 Q
<-1 3->


- Press Q button to confirm input

Indicated on display


Channel 5 Adaptation 1 Q
Store adaptation value?


- Press Q button to confirm input

Indicated on display


Channel 5 Adaptation 1 ->
Adaptation value is stored


- Press -> button.

Indicated on display


Rapid data transfer HELP
Select function XX


- Press buttons 0 and 6 to select "End output" function 06.
- Press -> button.