Check DTC Memory (Function 02)

NOTE: The displayed DTC information is updated only when initiating OBD or with "Erase DTC Memory" function 05.


- Switch printer on via the print-button (indicator lamp in button lights up).

Indicated on display


Rapid data transfer HELP
Select function XX


- Press 0 and 2 buttons to select "Check DTC memory" function 02.

Indicated on display


Rapid data transfer Q
02 - Check DTC memory


- Press Q button to confirm input

The number of stored malfunctions appears in the display.


X DTCs recognized!


The stored malfunctions are displayed and printed out one after the other.

- Check print-out against DTC table and repair all malfunctions as necessary.

If "No DTCs recognized" is displayed, the program, will return to the function selection prompt after the -> button is pressed.


No DTCs recognized!


Indicated on display


Rapid data transfer HELP
Select function XX


If something else is displayed:
See Operating instructions of Scan Tool (ST)
- End output (Function 06).
- Switch off ignition and disconnect diagnostic connector.