Check DTC Memory (Function 02)

NOTE: The displayed DTC information is updated only when initiating OBD or with "Erase DTC Memory" function 05.


- Switch printer on via the PRINT button (indicator lamp in button lights up).

Indicated on display:


Rapid data transfer HELP
Select function XX


- Press buttons -0- and -2-. This selects "Check DTC Memory", function 02.

Indicated on display:


Rapid data transfer Q
02 - Check DTC Memory


- Press -Q- button to confirm input.

Display indicates the number of stored DTCs.


X malfunctions recognized!


The stored DTCs are displayed and printed out in sequence.

- Check print-out against DTC table and repair malfunction.

If "No DTC recognized!" is displayed, the program will return to "Select function XX" after the -> button is pressed.


No DTC recognized ->


Indicated on display:


Rapid data transfer HELP
Select function XX


If something else is displayed:
See Operating instructions for Scan Tool (ST)
- End Output (function 06).
- Switch off ignition and disconnect data link connector.