Front Bumper, Removing and Installing

Front Bumper, Removing and Installing

- Remove noise insulation panel.
- Unclip air inlet grill at left and right.
- Unclip air guide for generator on right-side at bumper cover.
- For vehicles with headlight cleaning system, unclamp hose at T-connector on right-side using 3094 hose clamps.
- Pull off hose at T-connector.
- Remove clips (3x) in area of front wheelhousing liner and remove both nuts at wheelhousing.







- Remove bolts - 1 -.
- Remove bumper - 4 - toward front.