Front Door: Locations

Door Trim, Front







1 - Door trim
2 - Door security light
- Clipped in door trim
3 - Retaining clip
- For door trim
4 - Expanding clip
- To remove, press pin approx. 4 mm inward
- To install, press pin from front until it locks in
- Depending on design status Phillips-head screws can be used instead of expanding clips
5 - Phillips-head screw
- 1.7 Nm (15 in. lb)
6 - Door locking button
7 - Deadener
- Fasten to adhesive area (arrows) with dual sided tape
8 - Trim
- Inserted on to door trim
- Pry off carefully
9 - Phillips-head screw
- 1.8 Nm (16 in. lb)
10 - Door-inner activation
11 - Handle well-upper part
- With switch mounting
- To remove handle well, remove lower part and unscrew screws -12-
- Shown in one part version
12 - Phillips-head screw
- 1.8 Nm (16 in. lb)
- 2 parts
13 - Door well, lower part
14 - Lower-switch mounting
15 - Phillips-head screw
16 - Hex bolt
- 4.6 Nm (40 in. lb)
- 2 parts
17 - Entry light
- Clipped in door trim