Instrument Panel (Center), Removing and Installing

Instrument Panel (center), Removing And Installing

- Make auxiliary tool for disassembly of outlet.







- Bend wire of 3 mm diameter as shown in illustration.
Dimension - x - = 6 mm
- Remove speaker mounting for telephone.
- Position seats all the way back.
- Remove floor cover left and right.
- Turn accelerator pedal stop 1/4 revolution (90 degrees) further.







- Remove screws - 1 - and - 2 -.
- Remove left-side trim for center console - 3 -.
To remove, slide trim forward and unhook from back.







- Remove screws - 2 - and - 3 -.
The front screws - 2 - can be reached by turning back floor covering.
- Remove right-side trim for center console - 1 -.
To remove, slide trim forward and unhook from back.







- Place auxiliary tool - C - in holes of instrument cluster outlets - D -.
- Remove instrument cluster outlet out center part evenly.

NOTE: Do not hook auxiliary tool - C - into fins of instrument cluster outlet (the fins could break off).







- Remove 5 bolts (arrows).
- Pull instrument cluster, center part - 1 - out slightly.
- Pull off wires and separate connectors.
- Remove instrument cluster, center.
- Remove control module for operating electronics, navigation - J402 -.