Outside Rear-View Mirror

Outside rear-view mirror, removing and installing







- Unclip trim - 5 - from door component carrier.
- Remove seal - 6 -.
- Run door window to lowest position.

NOTE: On vehicles equipped with the mirror memory, remove the trim for the front door before disconnecting the harness connector.







- Remove bolt - 1 - together with washer - 2 -.
Tightening torque: 8 Nm (71 in.lb.)
- Lift out rear-view mirror - 4 - behind window opening seal and window guide.
- Lift off seal - 3 - simultaneously.
- Disconnect harness connectors.
- Align rear-view mirror to window guide when installing.