Headrest and Guides, Removing and Installing

Headrest And Guides, Removing And Installing

CAUTION: Note safety measures when working on airbag.

- Remove front seat.
- Remove upholstery for rear seatback.

Removing headrest







- Pull headrest - 1 - up and press release - 5 -.
- Remove headrest.
- Headrest guides - 4 - or - 6 - must be pushed in during installation into guides - 7 -.
- Unclip cover - 2 - if spring - 3 - must be removed.

Removing power headrest







- Loosen headrest - 1 - with force by hand in direction of arrow from retainer - 9 -.
- Press release - 5 - and remove headrest - 1 -.

8 - Mounting for power adjustable headrest

All:

NOTE:
- Headrest guide - 6 - with release - 5 - is installed on the left side of the seatback.
- Headrest guide - 4 - without release - 5 - is installed on the right side of the seatback.
- For manually adjusted headrest release - 5 - must point to the left.
- For power adjusted headrest release - 5 - must point to the right.
- Spring - 3 - installed only with manually adjustable headrest.

Removing headrest guide
- Remove headrest.
- Remove seatback cover.







- With aid of wrench SW17 - 1 - press headrest guide out upward.

NOTE: Illustration shown with seatback cushion.

Removing power adjustable headrest for sport seat







- Loosen headrest - 4 - with force by hand in direction of arrow from seatback - 1 - and pull up to stop.
- Replace clip - 2 - through cover - 1 -.
- Press clip - 2 - (2x) and remove headrest - 4 -.

3 - Headrest guides