Headrest Adjustment Motor and Sensor, Removing and Installing

Headrest Adjustment Motor And Sensor, Removing And Installing

- Seat removed
- Seatback cover and seatback cushion

Removing
- Remove 3 hex head bolts from engine for headrest adjustment at seatback frame.







- Remove bendable driveshaft - 6 - from motor.
- Cut open tie wraps and disconnect connectors - 2 - through - 5 -.
- Unclip sensor for headrest adjustment - 1 - from motor.
- Remove retaining bracket from motor.

Installing
- Clip on sensor for headrest adjustment to motor.
- Screw retaining bracket to motor or seatback with 6 Nm (53 in.lb.).