Seat Back: Locations

Seatback Electrical Components







- Seatback cover and seatback cushion, removing.

1 - Seatback adjustment sensor, drivers seat -F86-
- Installed only in driver seat
2 - Motor for seatback adjustment, drivers seat -V45- and motor for seatback adjustment, passenger seat -V46-
3 - Bendable driveshaft
- For headrest adjustment
- Installed in motor for headrest adjustment
- Fastened with 2 tie wraps
4 - Headrest - adjustment sensor- G129
- Installed only in driver seat
5 - Motor for-left headrest adjustment -V103- and motor for right headrest adjustment -V104-
6 - End switch for headrest adjustment (downward) driver seat -E196- and end switch for headrest adjustment (downward) passenger seat -E197-
- Available as replacement only together with end switch (upward) - 7
- Remove headrest cover -8- to adjust
7 - End switch for headrest adjustment (upward) driver seat -E194- and end switch for headrest adjustment (upward) passenger seat -E195-
- Available as replacement only together with end switch (downward) -6-
- Remove headrest cover -8- to adjust
8 - Cover for headrest adjustment
- Removing: drill out rivets and unhook cover
- Installing: hook in cover and rivet tight
9 - Valve block for lumbar support drive side -N209- and valve block for lumbar support passenger side -N210-
10 - Pressure - switch for lumbar support, drivers side -F224- and pressure switch for lumbar support, passenger side -F225-
- Inserted in protective sack -11-
11 - Protective-sack
- For pressure switch and pump for lumbar support adjuster
- Fastened with double sided tape to seat back frame
- Closed with tie wrap
12 - Pump for lumbar support driver side -V152- and pump for lumbar support passenger side -V153-
- Inserted in protective sack -11-
13 - Air pillow- for lumbar support adjustment
- Fastened to underside with double sided tape