Floor Pad Front, Removing and Installing

1 - Front left floor cover
- Removing:
- Unscrew nut -5-
- Unclip floor cover from guide pins -3- and remove.
2 - Front right floor cover
- Unclip and remove from guide pins -3-.
3 - Guide pin
- 2 parts
4 - Floor pad, rear
- Removing:
- Driver and passenger airbag removing. [1][2]Procedures
- Remove rear seat bench or remove power adjustable individual seat.
- Unclip both trim pieces lower C-pillar at lower area. Lower C-Pillar Trim, Removing and Installing
- Unclip entry sill inner, on both sides. Sill Molding Interior, Removing and Installing
- Remove B-pillar lower trim. B-Pillar Trim, Removing and Installing
- Remove upper right trim A-pillar. A-Pillar Upper Right Trim, Removing and Installing
- Pry out caps at floor outlet, unscrew floor outlet.
- Remove floor cover, front-right -2-.
- Unclip and turn back floor cover, front-left -1- out of guide pins -3-.
- Remove center console and air flow channel for rear seat area.
- Carefully loosen rear floor cover -4- from floor group and fold together in center.
- With second installer pry out toward rear door opening.
5 - Plastic nut