B-Pillar Trim, Removing and Installing

1 - Phillips-head screw
- 0.5 Nm (4 in. lb)
- 2 parts
2 - Three-point seat belt
3 - Upper B-pillar trim
- Removing:
- Remove B-pillar lower trim -4-.
- Remove front handle and coat hook. Coat Hook, Removing
- Unclip upper A-pillar trim at rear area.
- Unscrew seat belt from seat Fig. 3 in "Three-Point Front Seat Belt W/Belt Height Adjuster, Replacing". Service and Repair
- Remove Phillips-head screw -1- and -7-.
- Remove three-point seat belt -2- from B-pillar trim.
- Installing:
- Trim, B-pillar with height adjustment -8- together, as shown in Fig.


NOTE: Button for manual belt height adjustment must not be pressed during assembly.


- Trim, B-pillar hooked on B-pillar from the front and back (2 each).


NOTES:
- Manual belt height adjustment must be heard locking in all 5 positions.
- Button must return to upper position after activation.


4 - B-pillar lower trim
- Removing:
- Unclip front sill plate. Sill Molding Interior, Removing and Installing
- Unclip C-pillar trim at transition to B-pillar trim.
- Remove clips -5-.
- Raise trim slightly, disconnect connector.
- Remove trim from below.
5 - Clip
- 2 parts
6 - B-pillar
7 - Phillips-head screw
- 0.5 Nm (4 in. lb)
- 3 parts
8 - Height adjuster