D Pilar - Dented
Group: 53Number: 99-01
Date: Aug. 26, 1999
Subject:
D-Pillar Dented
Model(s):
A8, A4 1999
Condition
Dent in the D-pillar area may be caused by contraction of the insulating foam bonded to the outside sheet metal panel during the initial curing process.
Production
Insulating foam curing parameters corrected July 1999 beginning with VIN:
4DYN000500 (A8)
8DYA003420 (A4)
Service
- Heat area around dent (ususally noticeable in area shown). Hold heat gun approx. 50.8mm (2 in.) away from paint surface and apply heat using slow oscillating motion until panel reaches approx. 100°C (212°F).
^ Heat will cause the foam to release the panel and the dent will disappear.
CAUTION!
DO NOT overheat panel! Using a heat gun with too high a temperature will cause the paint to discolor.