With Manufacturer Scan Tool

Check DTC Memory


NOTE: The displayed DTC information is updated only when initiating OBD or with "Erase DTC Memory" function 05.


- Switch printer on via the PRINT button (indicator lamp in button lights up).

Indicated on display


Rapid data transfer HELP
Select function XX


- Press buttons -0- and -2-. This selects "Check DTC memory", function 02.

Indicated on display


Rapid data transfer Q
02 -Check DTC Memory


- Press -Q- button to confirm input.

The number of stored malfunctions appears in the display.


X DTC recognized


- The stored malfunctions are displayed and printed out one after the other.
- Check print-out against DTC table and repair all malfunctions as necessary.

If "No DTC recognized" is displayed, the program will return to "Select function XX" after the button is pressed.


No DTC recognized ->


Indicated on display


Rapid data transfer HELP
Select function XX


If something else is displayed:

- End Output (function 06).
- Switch off ignition and disconnect diagnostic connector.