Adaptation For Information Data-Bus
Adaptation
Individual functions are called up by entering the appropriate adaptation channel numbers (listed in the adaptation table).
NOTE:
- Using measuring value blocks 10,11, 12 and 15, the values that need to be transferred to the new instrument cluster can be read out before replacement.
- Adaptation channels 42-44 (see measuring value blocks 13 and 14) do not need to be transferred when replacing instrument cluster, because they are adjusted by the factory for each new instrument cluster
Adaptation table:
Initiating "Adaptation" function 10
Indicated on display
Rapid data transfer HELP
Select function XX
- Press buttons -1- and -0- to select "Adaptation" function 10.
- Press -Q- button to confirm input.
Indicated on display
Rapid data transfer Q
10 - Adaptation
- Press -Q- button to confirm input.
Indicated on display:
Adaptation
Insert channel number XX
- Enter desired adaptation channel (adaptation table).
- Press -Q- button to confirm input.
NOTE: After changing an adaptation value or ending an adaptation channel, "Adaptation" function 10 must be performed again before selecting another adaptation channel.
Adaptation for information data-BUS
NOTE:
- The adaptation values of the table are input.
- Observe notes when replacing instrument cluster.
Indicated on display
Rapid data transfer HELP
Select function XX
- Press -1- and -0- and confirm by pressing the -Q- button.
Indicated on display
Rapid data transfer Q
10 - Adaptation
- Press -0- button to confirm input.
Indicated on display:
Adaptation
Insert channel number XX
- Press buttons -6- and -2-.
- Press -Q- button to confirm input.
Indicated on display:
Channel 62 Adaptation 0
<-1 3->
- Press -> button.
Indicated on display:
Channel 62 Adaptation 0
Input adaptation value XXXXX
- Input desired value via scan tool keypad using table, fill initial positions with "0."
e.g. desired input value: 5 Navigation system III (NS-Low) with radio (symphony)
Keypad input: 00005
Indicated on display:
Channel 62 Adaptation 0 Q
Input adaptation value 00005
- Press -Q- button to confirm input.
Indicated on display:
Channel 62 Adaptation 5 Q
<-1 3->
- Press -Q- button to confirm input.
Indicated on display:
Channel 62 Adaptation 5 Q
Store changed value?
- Press -Q- button to confirm input.
Indicated on display:
Channel 62 Adaptation 5 ->
Changed value is stored
- Conclude adaptation of information data-BUS by pressing the -> button.
Table
Equipment Adaptation value
Navigation 4
No Navigation 0
Installed control modules that participate in the information system databus for the Audi A8 (measuring value block, see "Measuring value block 140") are added.