Multi-Function Transmission Range (TR) Switch, Replacing

Multi-function Transmission Range (TR) switch -F125-
Removing
^ Remove left transmission support.
^ Disconnect multi-function TR switch -F125- from transmission and pull off of selector shaft.

Installing





^ Locate multi-function TR switch on selector shaft.
Flat section on gearing in switch -3- must come to rest on flat section of selector shaft -1 -

Note: Locate the multi-function TR switch -F125- on the center of the selector shaft. Do not tilt the switch or push it on forcefully. Otherwise the switch contacts may be damaged.





^ Rotate switch until fitting hole -4- on switch housing can be located on fitting pin -2- on transmission housing.




Tightening torques