Front

1. Drive axle with ABS wheel speed sensor rotor
^ Check rotor for dirt and damage
^ If rotor is damaged, outer constant velocity joint must be replaced
^ Outer constant velocity joint is supplied with ABS wheel speed sensor rotor as replacement part
2. Screw and washer assembly, 10 Nm
3. Bracket
^ Insert ABS wheel speed sensor wire in bracket with rubber grommet.
4. Collar screw
5. Double clamp
^ Always replace
^ Before installing, coat hole in wheel bearing housing with brake cylinder paste G 000 650
^ Push into wheel bearing housing up to stop
6. Sealing cuff
7. ABS wheel speed sensor
^ Always replace.