Rear

1. Stub axle with rotor (Front Wheel Drive)
^ Check rotor for dirt and damage.
^ Stab axle is supplied together with rotor as replacement part
2. Drive axle with ABS wheel speed sensor rotor (all-wheel drive)
^ Check rotor for dirt and damage.
^ If rotor is damaged, outer constant velocity joint must be replaced together with ABS wheel speed sensor rotor.
^ Outer constant velocity joint is supplied with ABS wheel speed sensor rotor as replacement part
3. ABS wheel speed sensor
^ Removing and installing; Refer to ABS wheel speed sensor.
4. Sealing cuff
5. Double clamp
^ always replace
^ Before installing, coat hole in wheel bearing housing with brake cylinder paste G 000 650
^ Push into wheel bearing housing up to stop
6. Collar screw
7. Clip
^ Disengage and disconnect harness connector for wheel speed sensor wire.
^ Unclip ABS wheel speed sensor wire