Lumbar Support Motor With Transmission, Removing and Installing

Lumbar Support Motor With Transmission, Removing And Installing







WARNING: Before starting work on seats, connect VAS 5094 airbag adapter.

1 - Lumbar support body
2 - Foam pieces (2x)
- If not available as a replacement part, detach foam pieces from old motor and attach to new motor.







3 - Motor with transmission and Bowden cable
- Remove seat.
- Remove 2-way lumbar support.
- Cut tie wraps - 5 - (2x).
- Push lumbar support body together.
- Pull Bowden cable - 6 - in direction of arrow - A -.
- Detach Bowden cable - 6 - at pulley.
- Pull set pin - 7 - in direction of arrow - B - out of bracket.
- Remove bolts - 4 - (2x).
4 - Bolts (2x)
5 - Tie wraps
6 - Bowden cable
7 - Set pin