With Manufacturer's Scan Tool

Erase DTC Memory (Scan Tool Function 05)


NOTE: If the DTC memory cannot be erased, check DTC memory again and repair malfunctions.


Requirements
- DTC memory checked
- All malfunctions repaired

After DTC memory has been successfully checked:

Indicated on display


Rapid data transfer HELP
Select function XX


- Press buttons -0- and -5- to select "Erase DTC Memory" function 05.

Indicated on display


Rapid data transfer Q
05 Erase DTC Memory


- Press -Q- button to confirm input.

Indicated on display


Rapid data transfer ->
DTC memory is erased


The DTC memory is now erased.
- Press -> button.

Indicated on display


Rapid data transfer HELP
Select function XX


NOTE:
- This message indicates an error in the test sequence:


Attention!
DTC Memory not interrogated


- This message indicates an error in the test sequence:


Rapid data transfer ->
DTC memory not interrogated


Observe test sequence exactly: first check DTC memory, if necessary repair malfunctions then erase.