Gear Cluster and Selector Shaft, Removing and Installing
Gear cluster and selector shaft, removing and installing
1. 5th and 6th gear
^ Gear cluster remains flanged to transmission housing
^ Removing and installing, Refer to 5TH and 6TH Gear, Removing and Installing
2. Bearing plate complete
^ Removing and installing input shaft, drive pinion, hollow shaft and internal selector mechanism, Refer to Input Shaft, Drive Pinion, Hollow Shaft and Internal Selector Mechanism From Bearing Plate, Removing and Installing
3. Bolt - 25 Nm
^ Qty.3
^ Apply sealing paste AMV 188 000 02 when installing
4. Cover for selector shaft
^ Removing, Refer to Bearing Housing, Torsen Differential, End Cover, Internal Selector Mechanism, Input Shaft, Drive Pinion and Hollow Shaft, Removing and installing (Assembly Sequence)
^ Installing, Refer to Bearing Housing, Torsen Differential, End Cover, Internal Selector Mechanism, Input Shaft, Drive Pinion and Hollow Shaft, Removing and installing (Assembly Sequence)
5. Selector shaft complete
^ Removing, Refer to Bearing Housing, Torsen Differential, End Cover, Internal Selector Mechanism, Input Shaft, Drive Pinion and Hollow Shaft, Removing and installing (Assembly Sequence)
^ Installing, Refer to Bearing Housing, Torsen Differential, End Cover, Internal Selector Mechanism, Input Shaft, Drive Pinion and Hollow Shaft, Removing and installing (Assembly Sequence)
^ Disassembling and assembling, Refer to Selector Shaft (Complete), Disassembling and Assembling
6. Locking bolt
^ For aluminum bolt: 50 Nm
^ For steel bolt: 70 Nm
^ Mark installation positions of aluminum bolts and steel bolts; do not interchange
7. Transmission housing
^ Servicing, Refer to Transmission Housing, Servicing
8. Oil filler plug, 40 Nm
9. Differential
^ Removing and installing, Refer to Differential Assembly, Service and Repair
10. Oil drain plug, 40 Nm
11. Dowel sleeves
^ Qty.2
12. Bolt, 25 Nm
^ Qty.12