Resetting SRI After Servicing

Resetting SRI After Servicing

Indicated on display


Rapid data transfer HELP
Select function XX


- Press buttons -1- and -0- to select Adaptation" function 10 and press -Q- button to confirm input.

Indicated on display


Adaptation Q
Insert channel number XX


- Press buttons -0- and -2- to insert channel 02.
- Press -Q- button to confirm input.


NOTES:
- It is possible to reset the SRI without using the VAG1551/1552.
- Adaptation channel 2 can only be used for instrument clusters with data version D05 and newer.

Indicated on display. (service interval will be displayed, e.g. 1)


Channel 2 Adaptation 1 ->
<-1 3->


1 - indicates that the oil service is due.
10 - indicates that the inspection service is due.
11 - indicates that oil and inspection services are due.


NOTE: Reset the SRI using only the direct input method.


- Press -> button.

Indicated on display


Channel 2 Adaptation 1 ->
Input adaptation value XXXXX


Delete the following service events by using the adaptation values listed below:

Adaptation value Service Event
00000 Delete OIL and INSP
00010 Delete OIL
00001 Delete INSP

- Using keypad, enter appropriate adaptation value to delete service event, e.g. 00000.
- Press -0- button five times.

Indicated on display


Channel 2 Adaptation 1 Q
Input adaptation value 00000


- Press -Q- button to confirm input.

Indicated on display


Channel 2 Adaptation 0 Q
<-1 3->


- Press -Q- button to confirm input.

Indicated on display


Channel 2 Adaptation 0 Q
Store changed value?


- Press -Q- button to confirm input.

Indicated on display


Channel 2 Adaptation 0 ->
Changed value is stored


- Press -> button to end SRI reset.