Rear Bumper: Service and Repair

Rear Bumper, Removing And Installing (VIN 8D XA 200 001 >)







1 - Bumper
- Before removing, remove rear panel trim.
- Remove rear lid seal around loading edge and sides.
- Fold luggage compartment cover forward.
- Remove tie-downs left and right at side trim and unclip rear side trim.
- Carefully pull side trim at left and right toward vehicle interior.
- Remove screw w/washer assembly - 6 -.
- Unclip bumper from bracket - 4 - and remove toward rear.







2 - Spoiler
3 - Clip
4 - Bracket
- To remove, remove metal bolts - 5 - and remove bracket - 2 -.
5 - Metal bolt
6 - Screw w/washer assembly
- 23 Nm
7 - Bracket
8 - Cover strip