Adaption of Fuel Gauge Sender

M.y. 1998 >

Adaptation Of Fuel Guage Sender
This function is used to adjust the resistance range for the fuel gauge sender in order to compensate for any misalignment of the fuel guage.

Indicated on display


Rapid data transfer HELP
Select function XX


- Press buttons -1- and -0- to select function 10 and press -Q- button to confirm input.

Indicated on display


Adaptation
Insert channel number XX


- Press buttons -3- and -0- to insert channel 30.
- Press -Q- button to confirm input.

Indicated on display


Channel 30 Adaptation 128 ->
<-1 3->


The display shows the adaptation value for example 128.


NOTES:
- 128 is the adaptation value for the standard resistance range for the fuel guage sender as set by the factory.
- The resistance value for the fuel sender resistance range can be adjusted by ± 8 ohms (ohms) to give an adaptation value between 120 and 136.


- Press -> button.

Indicated on display


Channel 30 Adaptation 128
Input adaptation value XXXXX


- Input adaptation value using keypad on VAG1551, fill in leading digits with zeroes "0."

Indicated on display


Channel 30 Adaptation 128 Q
Input adaptation value 00132


- Press -Q- button to confirm input.

- Indicated on display


Channel 30 Adaptation 132 Q
<-1 3->


- Press -Q- button to confirm input.

- Indicated on display


Channel 30 Adaptation 132 Q
Store changed value?


- Press -Q- button to confirm input.

- Indicated on display


Channel 30 Adaptation 132 ->
Changed value is stored


- Press -> button to end SRI adaptation.