Programming and Relearning

The following changes can be implemented and saved using the adaptation function:
- Sensitivity settings of the ultra-sound sensors can be set so that the sensors react with less sensitivity.

Carrying out "Adaptation" function 10

Indicated on display


Rapid data transfer HELP
Select function XX


- Press buttons -1- and -0- to select "Adaptation" function 10.

Indicated on display


Rapid data transfer Q
10 - Adaptation


- Press -Q- button to confirm input.

Indicated on display


Adaptation
Insert channel number XX

- Press buttons -1- and -0- to insert channel number 10.

Indicated on display


Adaptation Q
Channel display 10


- Press -Q- button to confirm input.

Indicated on display (sensitivity of sensors is displayed: e.g. 100%)


Channel 1 Adaptation 100 ->
Sensitivity In % (-1 3-)


NOTE: The factory adjusted maximum sensitivity of the ultra-sound sensors is designated as 100%. The sensor sensitivity can be reduced to 50 %.


- Press button ->.

Indicated on display


Channel 1 Adaptation 100
Input adaptation value XXXXX


- Enter sensitivity value (e.g. 75% = 00075).

Indicated on display


Channel 1 Adaptation 100 Q
Input adaptation value 00075


- Press -Q- button to confirm input.

Indicated on display


Channel 1 Adaptation 75 Q
Sensitivity in % (-1 3-)


- Press -Q- button to confirm input.

Indicated on display


Channel 1 Adaptation 75 Q
Store changed value?


- Press -Q- button to confirm input.

Indicated on display


Channel 1 Adaptation 75 ->
changed value is stored


- Press -> button to end adaptation procedure for sensitivity.

Indicated on display


Rapid data transfer HELP
Insert address word XX