With Manufacturer Scan Tool

Erase DTC Memory


NOTE: After DTC memory is erased, its contents are automatically output. If DTC memory cannot be erased, check DTC memory again and repair malfunction.


Requirements
- DTC memory checked. [1][2]Reading Diagnostic Trouble Codes
- All malfunctions repaired.

After successful DTC memory check:


Indicated on display


Rapid data transfer HELP
Select function XX


- Press buttons -0- and -5-. This selects "Erase DTC memory", function 05.


Indicated on display

Rapid data transfer Q
05 - Erase DTC Memory


- Press -Q- button to confirm input.


Indicated on display:

Rapid data transfer
DTC Memory is erased!

DTC memory is erased.
- Press -> button.

Indicated on display

Rapid data transfer HELP
Select function XX


NOTE: Test sequence is faulty if this message is displayed.


WARNING!
DTC memory was not checked


Test sequence is faulty if this message is displayed.


Rapid data transfer ->
DTC memory was not checked


Follow test sequence exactly: first check DTC memory, repair malfunction(s) if necessary, then erase.