One-Piece Rear Seat Backrest, Removing and Installing

One-Piece Rear Seat Backrest, Removing And Installing







1 - One-piece backrest
- Remove rear seat.
- Remove headrests.
- For vehicle with ski sack, remove ski sack frame.
- Remove headrest guides.
- Remove bolts - 3 - (2x).
- Push rear backrest - 1 - up and detach rear backrest - 1 - from brackets - 4 - (4x).

Vehicles with LATCH System:
- Remove tabs - 2 - behind LATCH bracket.

NOTE:
- To install rear backrest, push tab - 2 - behind LATCH bracket.
- If LATCH is retrofitted, it may be necessary to flatten tab - 2 - in vise down to about 3 mm.

2 - Tab







3 - Bolts (2x)
- 8 Nm (71 in.lb)
4 - Hooks (4x)