Adapting SRI After Replacing Instrument Cluster (Remaining Time Until Next Service Inspection)

M.y. 1998 >

Adapting SRI After Replacing Instrument Cluster (Remaining Time Until Next Service Inspection)
This function is used to enter the remaining days until the next service inspection is due after the instrument cluster was replaced.

Indicated on display


Rapid data transfer HELP
Select function XX


- Press buttons -1- and -0- to select function 10 and press -Q- button to confirm input.

Indicated on display


Adaptation
Insert channel number XX


- Press buttons -1- and -2- to insert channel 12.
- Press -Q- button to confirm input.

Indicated on display


Channel 12 Adaptation 11 ->
<-1 3->


The display shows the days remaining until the next inspection service is due (in this example "11" indicates 110 days remaining).


NOTES:
- Values can only be entered in increments of 10 days. Therefore the display shows blocks of 10 days.
- The value entered is counted down to 0 days.
- If the instrument cluster must be replaced, observe notes. Input Values For Instrument Cluster Replacement
- When using the scan tool keypad, only the direct input method can be used.
- If an incorrect value is input, the "adaptation" function 10 will be cancelled and must be initiated again.


- Press -> button.

- Indicated on display


Channel 12 Adaptation 0
Input adaptation value XXXXX


- Input desired interval value using keypad on VAG1551, fill in leading digits with zeroes "0."

Example:
Remaining time: 110 days
Input value: 00011

- Indicated on display


Channel 12 Adaptation 0 Q
Input adaptation value 00011


- Press -Q- button to confirm input.

- Indicated on display


Channel 12 Adaptation 11 Q
<-1 3->


- Press -Q- button to confirm input.

- Indicated on display


Channel 12 Adaptation 11 Q
Store changed value?


- Press -Q- button to confirm input.

- Indicated on display


Channel 12 Adaptation 11 ->
Changed value is stored


- Press -> button to end SRI adaptation.