Wheel Hub

- Install both upper link ball joints into wheel bearing housing.
- Install new self-locking nut -1- and tighten to
40 Nm (30 ft. lbs.).
- Press upper links downward as far as possible when tightening.
- Install tie rod end and new self locking nut -4-. Tightening torque:
50 Nm (37 ft. lbs.)
- Tighten bolt -3-. Max tightening torque:
5 Nm (44 inch lbs.)
- Bolt on brake splash guard. Tightening torque:
10 Nm (7 ft. lbs.)
- Install brake caliper and tighten bolts to
120 Nm (89 ft. lbs.).
- Install wheels and tighten wheel lugs to
120 Nm (89 ft. lbs.).
- Install new bolt for drive axle. Tightening torques:
M14: 115 Nm (85 ft. lbs.) + 1/2-turn (180°)
M16: 190 Nm (140 ft. lbs.) + 1/2-turn (180°)

Note: These are just some of the torque specifications required, for the complete procedure, please refer to Service and Repair for the Wheel Hub. Service and Repair