Testing Delivery

TESTING DELIVERY


Special tools, test equipment and auxiliary items
^ VAG 1402
^ VAG1402/3 adapter
^ 3094 hose clamp






- Unclip top engine cover and remove.





- Unbolt ribbed belt cover.





- Pinch off suction hose using 3094 hose clamp.
- Press spring clip and disconnect harness connector from fuel injector.
- Counter-hold at hex on flexible hose and remove supply line from flexible hose (arrow).





- On vehicles with V6 2V engine: screw VAG1402/3 adapter into power steering pump in place of flexible hose.





- On vehicles with V6 5V engine: counter-hold at hex on flexible hose and remove supply line from flexible hose (arrow).
- Screw VAG1402 pressure gauge hose to expansion hose.





- Screw VAG1402 pressure gauge hose to VAG1402/3 adapter.
- Close pressure gauge shut-off valve (lever positioned toward left).
- Reconnect fuel injector harness connector.
- Remove hose clamp from suction hose.
- Start engine and top off reservoir (if necessary).
- With engine idling, read power steering pump pressure on gauge.
^ Do not measure for longer than 10 seconds
^ Specified value: 110 - 120 bar (1595 - 1740 psi)

If specified value is not attained:
- Replace power steering pump.
- Check hydraulic fluid level.
- Check steering system for leaks.
- Bleed steering system.