LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2000 >> A4 Sedan (8D2) V6-2.8L (ATQ) >> Repair and Diagnosis >> Transmission and Drivetrain >> Manual Transmission/Transaxle >> Service and Repair >> Overhaul (Subassemblies) >> Pinion Shaft, Disassembling & Assembling >> Fig. 16 Inserting Spring Into Gear

Fig. 16 Inserting Spring Into Gear



Inserting spring into gear.






- The bent end of the spring (arrow) must be hooked into the hole of the gear.
scientia non olet · About LEMON Manuals