Servicing

Lower control arm, servicing

WARNING:
^ Do not attempt to weld or straighten the load bearing components of the suspension or parts of the suspension.
^ Always replace self-locking nuts.
^ Always replace corroded nuts or bolts.





1. Rear bonded rubber mount
^ Pressing out. Refer to Fig. 1
^ Pressing in. Refer to Fig. 2
2. Lower control arm
3. Front bonded rubber mount
^ Pressing out is extremely difficult or in some cases not possible. It is recommend to replace complete control arm if bonded rubber mount is faulty.





Fig. 1 Pressing out rear bonded rubber mount





Fig. 2 Pressing in rear bonded rubber mount