With Manufacturer Scan Tool

Erase DTC Memory


NOTE:
- At the same time DTC memory is erased, resetting of the function status register takes place
- If DTC memory cannot be erased, check DTC memory again and repair malfunction.


Requirements
- DTC memory checked.
- All malfunctions repaired.

After successful DTC memory check:

Indicated on display


Rapid data transfer HELP
Select function XX


- Press buttons -0- and -5-. This selects "Erase DTC memory", function 05.

Indicated on display


Rapid data transfer Q
05 Erase DTC Memory


- Press -Q- button to confirm input.

Indicated on display


Rapid data transfer ->
DTC Memory is erased


DTC memory is erased.
- Press -> button.

Indicated on display


Rapid data transfer HELP
Select function XX


NOTE:
- Test sequence is faulty if this message is displayed.


Attention ->
DTC Memory is not interrogated


- Test sequence is faulty if this message is displayed.


Rapid data transfer ->
DTC Memory is not interrogated

Follow test sequence exactly: first check DTC memory, repair malfunction(s) if necessary, then erase.