With Manufacturer's Scan Tool

Check DTC Memory


NOTE: The displayed DTC in formation is updated only when initiating OBD or with "Erase DTC Memory" function 05.


- Switch printer on via the print-button (indicator lamp in button lights up).

Indicated on display


Rapid data transfer HELP
Select function XX


- Press buttons -0- and -2-. This selects "Check DTC memory," function 02.

Indicated on display


Rapid data transfer Q
02 - Check DTC Memory


- Press -Q- button to confirm input.

The number of stored malfunctions appears in the display.


X DTC recognized!


The stored malfunctions are displayed and printed out one after the other.

- Check print-out against DTC table and repair all malfunctions as necessary. Automatic Headlight Aim Control

If "No DTC recognized!" is displayed, the program will return to "Select function XX" after the -> button is pressed.


No DTC recognized! ->


Indicated on display


Rapid data transfer HELP
Select function XX

- End Output (function 06).
- Switch off ignition and disconnect diagnostic connector.