With Manufacturer Scan Tool

Erase DTC Memory


NOTE: If DTC memory cannot be erased, check DTC memory again and repair any malfunctions.


Requirements
- DTC memory checked
- All malfunctions repaired

When DTC memory has been checked:

Indicated on display


Rapid data transfer HELP
Select function XX


- Press buttons -0- and -5- to select "Erase DTC Memory" function 05.

Indicated on display


Rapid data transfer Q
05 - Erase DTC Memory


- Press -Q- button to confirm input.

Indicated on display


Rapid data transfer ->
DTC Memory is erased!


DTC memory is now erased.

- Press -> button.

Indicated on display


Rapid data transfer HELP
Select function XX


NOTE:
- This message indicates an error the test sequence.


Attention! ->
DTC Memory is not interrogated


- This message indicates an error in the test sequence.


Rapid data transfer
DTC Memory is not interrogated


- Adhere exactly to the test sequence: first check DTC memory, repair malfunctions as necessary, then erase DTC memory.